Lois Larson
The Apple AirPort Time Capsule A1470 is a hard drive-equipped variant that offers 802.11ac speed on a time capsule NAS. If you are facing issues with your AirPort Time Capsule, you can perform a factory reset on the device. This will restore the device to its original settings and may help resolve any problems you are experiencing. In the next section, we will provide a step-by-step guide on how to perform a factory reset on the Apple AirPort Time Capsule A1470.
How to reset Airport Model A1470
| Characteristics | Values |
|---|---|
| Reset type | Soft reset, Hard reset, Factory-default reset |
| Reset button location | Next to the power socket |
| Reset button tool | Pen, paperclip, pin |
| Reset button hold time | 1 second, 5 seconds, 6 seconds, 7-8 seconds, 10 seconds |
| Reset status light | Amber |
| Reset status light pattern | Flashing, flashing rapidly |
| Reset completion time | 1 minute |
| Reset completion status light | Slow blinking amber light |
| Reset completion action | Reconfigure using AirPort Utility |
| Reset completion status | Data on the Time Capsule hard drive remains intact |
Explore related products
Hard reset
Resetting your AirPort base station restores it to a state that allows you to regain control of it when you've lost the base station password or the base station isn't responding as expected. Here's how to perform a hard reset on your Apple AirPort Model A1470:
Step 1:
Before resetting your base station, ensure that its firmware is up to date.
Step 2:
Disconnect the base station from its power source.
Step 3:
Locate the reset button on the base station, usually found next to the ports.
Step 4:
While holding down the reset button, reconnect the base station to its power source and continue to hold the reset button.
Step 5:
Hold the reset button for about 6 seconds, until the status light on the base station flashes amber rapidly.
Step 6:
Release the button and wait about a minute for the base station to finish restarting.
Step 7:
You can then use AirPort Utility to reconfigure the base station.
Step 8:
Open AirPort Utility on your Mac by navigating to Finder > Applications > Utilities > AirPort Utility.
Step 9:
Click on the File menu in the upper left corner of the Mac's screen to access the erase options.
Step 10:
If you plan to keep the Time Capsule, use the Quick Erase option, which will only take a few minutes.
Step 11:
If you're giving away or selling the Time Capsule, use the Zero Out Data option for a secure erase. This will take significantly longer, depending on the size of your hard drive.
Step 12:
Once the setup is complete, click "Done".
Note that a factory reset will erase the network settings on the Time Capsule, but the data on the Time Capsule hard drive will remain intact. If you wish to erase the internal hard drive, a separate procedure is required.
Indianapolis Airport: Uber Availability and Accessibility
You may want to see also
Explore related products
Soft reset
- Ensure that the firmware of your base station is up to date.
- Locate the small reset button on the base station, next to the power socket and ports.
- Press and hold the reset button for 1 second. You can do this using a pen or a straightened paperclip.
- The middle LED will blink once every second while the device is in soft reset mode.
- The base station password will now be set to "public" and the IP address will be reset.
- Connect to the reset base station using the following manual network settings on your computer:
- From the Wi-Fi status menu, choose the network created by the base station.
- Open AirPort Admin Utility for Graphite and Snow 4.2.5 to reconfigure the base station.
- Unless you've been given an IP address by your Internet Service Provider or system administrator, do not change the IP address.
Note that a soft reset will reset the base station password and disable security for 5 minutes so that you can join the network to make changes. If no changes are made within 5 minutes, the base station will revert to its former settings.
Oxford's Airport: Does it Exist?
You may want to see also
Explore related products
Factory reset
- Disconnect the power cable from the back of the Airport Time Capsule.
- Locate the small reset button on the device. It is usually found next to the power socket or the ports.
- Press and hold the reset button for about 1 second, then release.
- While holding the reset button, reconnect the power cable.
- Continue to hold the reset button for another 6-8 seconds until the status light on the device flashes amber rapidly.
- Release the button and wait for about a minute for the device to finish restarting.
- Open AirPort Utility on your Mac to reconfigure the device.
Note that performing a factory reset will only erase the network settings on the Time Capsule. If you wish to erase the data on the internal hard drive, you will need to perform a separate procedure.
Before performing a factory reset, ensure that your device's firmware is up to date. Additionally, if you plan to sell or give away your Time Capsule, it is recommended to use the "Zero Out Data" option for a secure erase of the data.
Sacramento Airport: Uber Availability and Accessibility
You may want to see also
Reset button location
The reset button on the Apple Airport Time Capsule A1470 is located next to the power socket on the device. It is a small button that can be pressed with a pen or a straightened paperclip.
To perform a factory reset, first, power off the device by pulling the power cord from the back of the unit. Then, hold in the reset button for 6-10 seconds until the status light on the base station flashes amber. Release the button and wait for a minute for the device to restart.
If you are having trouble with the reset button, you can try another method that uses software and an Ethernet cable to connect from a Mac to the Time Capsule. This method will require a Mac computer.
If your reset button is broken, you can attempt to repair it yourself if you have a soldering iron and some basic knowledge. You can buy a simple button on eBay and replace it yourself, or take it to the Apple store if your device is under warranty.
Isle of Palms: Airport Options and Recommendations
You may want to see also
Troubleshooting
If you are experiencing issues with your Apple A1470 Airport Time Capsule, there are several troubleshooting methods you can try.
Firstly, determine whether you need to perform a soft or hard reset. A soft reset is useful if you have forgotten your base station password or are unable to administer the base station. This type of reset will disable security for 5 minutes, allowing you to join the network and make changes. If no changes are made within this time frame, the base station will revert to its previous settings.
On the other hand, a hard reset is more comprehensive. It restores the base station to an unconfigured state while retaining the last saved configuration and profiles. This type of reset is ideal when the base station is unresponsive or when you are troubleshooting network issues that haven't been resolved by other methods.
If you suspect that your Airport Time Capsule is not functioning correctly due to wireless connectivity issues, you can try performing a factory default reset. This process will erase the network settings on the Time Capsule, but it will not affect the data stored on the hard drive.
- Disconnect the power cable from the back of the Airport Time Capsule.
- Locate the small reset button next to the power socket.
- Hold down the reset button and simultaneously plug the power cord back in.
- Continue holding the reset button for about 7-8 seconds, and then release it.
- Allow approximately one minute for the Time Capsule to restart. You will know it's ready when you see a slow blinking amber light status.
If your reset button is broken, there is an alternative method using software. However, this method requires a Mac computer and an Ethernet cable to connect to the Time Capsule.
Additionally, before performing any reset, it is recommended to ensure that your firmware is up to date. After the reset, you can use the AirPort Utility to reconfigure your base station.
Delhi Airport: Navigating the Best Travel Options
You may want to see also
Frequently asked questions
You can reset your Airport Time Capsule A1470 by performing a factory reset. First, disconnect the base station from its power source. Then, locate the small reset button next to the power socket and hold it in while plugging the power cord back in. Keep holding the reset button for 6-8 seconds, then release. Wait for about a minute for the Time Capsule to restart and the status light to turn into a slow blinking amber light.
If your reset button is broken, you can perform a factory reset with software. However, this method requires a Mac computer and an Ethernet cable to connect from the Mac to the Time Capsule.
A factory reset will erase the network settings on the Time Capsule, but the data on the Time Capsule's hard drive will remain intact. If you wish to erase the internal hard drive, a separate procedure is required.
