Renaming Airport Partition On Mac: A Simple Guide

Renaming an airport partition on a Mac can be a tricky process. While it is possible to rename the base using Airport Utility, renaming a partition is more complex. This is because the Time Capsule only has one partition, and removing the drive is the only way to create multiple partitions. This action will void the warranty of the Time Capsule, but not the warranty of the Mac. There are a few potential workarounds, including using Disk Utility or Finder to rename the drive, but these methods may not always be successful.

Explore related products

Room Divider, 6 Panel Folding Privacy Screens with Wider Support Feet, 6 Ft Portable Room Partition for Room Separator, 132" W X 71" H, Black

$95.99

FDW Room Divider 6 Panels Wood Mesh Hand-Woven Design Indoor Folding Portable Partition Screen, Coal Black

$85.99

DECOLAB Room Divider Panel, Standing Privacy Partition Dividers for Office, Studio Apartment, Classroom, Home, Restaurant, Scratch Resistance, 29"x65", Iron

$119.69 $125.99

DECOLAB Room Partition Panel, Freestanding Portable Privacy Cubicle Partition for Offices, Classroom, Studio, Healthcare, Workspace, Scratch Resistance, 29"x65" Midnight

$125.99

Room Partition,Folding Privacy Divider,Office Partition Dividers,Office Dividers Wall, 10'6"W x 6'7"H,Grey

$669.99

Adjustable Partition Hanger Set, 2 Pack, Fits Panels Less Than 1.8" Thick, Metallic Black

$6.99

Rename Airport partition in macOS

To rename an Airport partition in macOS, you must first connect the drive directly to your computer. This is because you cannot partition the drive from Disk Utility or Airport Utility. Once you have done this, you can use Disk Utility to rename the partition.

To do this, boot your Mac into recovery mode by pressing CMD-R, open Disk Utility, highlight the disk with the bad volume name, and click the name beside the picture of the disk. From here, you can edit the name of the partition.

Alternatively, you can right-click on the partition in Finder, select "Get Info," and enter the new name in the "Name & Extension" field. If you rename the volume where your home directory is located, be sure to update your home directory path in System Preferences before rebooting.

It is important to note that the Time Capsule only has one partition, and removing the drive from the Time Capsule to create multiple partitions will void the warranty.

Explore related products

Wall Partition Room Divider, Width Adjustable from 7ft to 11ft, Metal Frame Room Partition with Lockable Universal Wheels, Expandable Privacy Screen for Bedrooms and Offices

$115.99

2pcs Movable Panel Feet for Folding Privacy Screens Durable Partition Base for Outdoor Spaces Living Rooms Hotels Bedrooms Easy Assembly

$18.89

Wood Wall Divider for Room Separation Ceiling To Floor, 6 8 10-Pack Black Wooden Slats Screen Partition Post for Studio/Apartments/Teahouse/Stairway Entrance, with Adjustable Foot(6-Pack,70cm/27.5in/2

$137.43

Roundhill Furniture Aurra 4-Panel Wood Room Divider, Folding Portable Partition Screen, Black

$169.99

Room Divider Partition Post Metal Slats, Custom Size Floor to Ceiling Privacy Screens Columnar, Corridor/Stairwell Wall Partition Column(Black,70cm/27.5in/2.3ft)

$92.51

3 Panel Partition Wall, 260 x 180 cm, Black

$52.39

Rename Airport partition in Disk Utility

To rename an Airport partition in Disk Utility, you must first temporarily connect the drive directly to your computer. This is because the name of the drive is set automatically by the Time Capsule (TC) itself, and the only way to change the name is to remove the drive from the TC.

Once you have connected the drive to your computer, you can use Disk Utility to rename the partition. To do this, follow these steps:

• Open Disk Utility.
• Find the disk with the bad volume name and highlight it.
• Click the name of the disk, or select File > Rename.
• Enter the new name for your partition.

Alternatively, you can right-click on the partition in Finder, select "Get Info", and enter the new name there. If you rename the volume where your home directory is located, remember to update your home directory path in System Preferences before rebooting.

Explore related products

Ceiling to Floor Partition Post/Room Dividers Metal Slats，5/8/10pcs Privacy Screen Post Wall Poles Columns for Room Separation，No Drill Installation(5pcs,235cm/93in/7.7ft)

$342.33

6 Panel Room Divider Screen with Removable Shelves - Folding Portable Partition for Privacy - Wooden Folding Screen Room Divider (Black)

$90.39

TUP The Urban Port 148948 Handmade Foldable 4-Panel Wooden Partition Screen/Room Divider, Brown

$178.88

2pcs Thickened Divider Bracket Folding Partition Support Bases with Stabilizing Feet and Wheels Privacy Screen Holder for Home Office Hotel Separation

$24.59

Wall Partition Room Divider Floor to Ceiling Metal Slats, Room Partition and Dividers Posts, Privacy Screen Columnar/wall Separator for Hallway Bathroom Kitchen Apartment(White,70cm/27.5in/2.3ft)

$161.39

Home Partition Decoration Folding Privacy Screen Privacy Screen Partition Waterproof Wood Plastic Partition Panel, Home Office Decoration, 5 Mm Thick Hanging Room Dividers(Black,1Pcs)

$23.95

Rename Airport partition in AirPort Utility

To rename an Airport partition in AirPort Utility, you must first connect the drive directly to a computer. Then, you can use AirPort Utility to edit the name of the partition.

• Connect the Drive Directly to a Computer: This is a temporary connection solely for the purpose of renaming the partition. You can achieve this by plugging in the USB cable from the drive to your computer.
• Open AirPort Utility: Launch the AirPort Utility software on your computer.
• Edit the Time Capsule: In AirPort Utility, locate and select the option to edit the Time Capsule settings. This is usually found under the Disks tab or a similar section.
• Click on the Disks Tab: Once you are in the editing section, navigate to the Disks tab if you are not already there.
• Rename the Partition: Under the Partitions section, you should see the current name listed. Click on that name and simply replace it with your desired new name.

It is important to note that some users have reported issues with the name reverting back to the old one after rebooting or unplugging the drive. This may be due to the specific hardware or software versions in use. In such cases, you may need to explore alternative methods, such as using Disk Utility or Finder to rename the partition, but this may void the warranty of the Time Capsule. Always ensure you have properly set up your Time Capsule and followed the official guidelines before attempting any modifications.

Explore related products

Wall Partition Room Divider Floor to Ceiling 1 Pc / 3pcs / 5pcs Modern Decor Screen Partition Post for Apartment, Black Room Separator Wooden Slats, Customized Room Divider Columns(1 pc,70cm/27.5in/2.

$80.54

2Pcs Removable Base for Room Divider Feet Folding Partition Panel Support Smooth Finish for Home and Office Use Elegant Design for Various Settings

$22.89

Wall Partition Room Divider Floor to Ceiling Indoor Metal Frame Screen Partition Post, White Modern Room Separator Column, Adjustable Feet Wall Post Partition for Apartment(1 pc,215cm/84.6in/7.05ft)

$166.6

Waterproof Hanging Room Divider Panel - DIY Partition Screen for Home & Office(15Pcs)

$126.93

Home Partition Decoration Folding Living Room Partition Privacy Screen, Hanging Screen Panel for Home Living Room Bedroom Office, 29 X 29 Cm Hanging Room Dividers(15Pcs)

$90.44

Floor to Ceiling Wall Partition Post/Separadores de Cuartos, 120 140 160 180 200 220 240 250 260 275 280 290 300 cm Tall Temporary Hollow Decor Room Divider Column for Separation(2 Pack,H 135cm (4.4

$199.61

Rename Airport partition in Finder

To rename an Airport partition in Finder, you must first temporarily connect the drive directly to your computer. Then, you can try the following methods:

Using Finder

• Right-click on the partition in Finder.
• Select "Get Info".
• Enter the new name in the "Name & Extension" field.

Alternatively, you can simply change the name in the left-hand column of Finder, just like you would for a file or folder.

Using Disk Utility

If the above method doesn't work, try using Disk Utility:

• Boot your Mac into recovery mode by pressing CMD + R on startup.
• Open Disk Utility.
• Highlight the disk with the bad volume name.
• Click the name beside the picture of the disk or select "File" and then "Rename".
• Enter the new name.

Using Terminal

If you are comfortable using the Terminal, you can also try the following command:

Diskutil rename /Volumes/CURRENT_NAME/ NEW_NAME

Replace "CURRENT_NAME" with the current name of your partition and "NEW_NAME" with your desired name.

Using AirPort Utility

If you are using a Time Capsule drive, you can try using AirPort Utility:

• Click "Manual Setup" on your Time Capsule.
• Go to the "Disks" tab.
• Click on the current name under "Time Capsule Disk".
• Type the new name to the right of the current name.
• Click "Update".

Note: Some users have reported that the partition name reverts to the old name after rebooting or reconnecting to the Time Capsule. In this case, you may need to remove the drive from the Time Capsule and connect it directly to your computer to rename it permanently.

Explore related products

Standing Door Partition, Wooden Room Divider Wall Fencing, Folding Room Partition Privacy Screens with Detachable Base, for Home, Hotel, Office, Porch(4 Pack)

$621.57

Wood Slats Screen Partition Post 1 Pack 10 Pack, Floor to Ceiling Wall Partition Post Room Divider Adjustable Height, for Home Hotel Office Entrance, No Need To Drill(1 pack,125cm/49.2in/4.1ft)

$139.85

Room Divider Movable Cubicle Dividers Partition Wall - 1 2 3 4 5 6 7 8 9 10ft Tall, Customized Floor to Ceiling Room Screens Partition Column, No Need to Drill(10pcs Height,3.5ft)

$493.1

Folding Paper Room Divider – Lightweight Freestanding Privacy Screen for Home, Office & Studio – Portable Partition Wall, No Assembly Required

$638.99

Happybuy 6-Panel Room Divider, Hand-Woven Folding Privacy Screen with Hinges, Portable Freestanding Partition for Room Separation, Adjustable Black Wall Divider for Home, Office, and Living Spaces

$170.73

Indoor Folding Portable Partition Screen, Paper Room Divider, Wall Dividers for Room Separation, for Modern Home Office, Strong and Stable, White,L400*W43*H160cm

$606.99

Rename Airport partition in Recovery Mode

To rename an Airport partition in Recovery Mode, you must first connect the drive directly to your computer. This is because you cannot rename the drive when it is plugged into the AirPort. Once you have connected the drive to your computer, you can then unmount the drive and power it down.

From here, you can boot into recovery mode with CMD-R, open disk utility, highlight the disk with the bad volume name, and then click the name beside the picture of the disk. This will allow you to change the name.

Alternatively, you can right-click on a partition in Finder, select "Get Info," and enter the new name there. If you rename the volume where your home directory is located, be sure to update your home directory path in the System Preferences before rebooting.

It is important to note that if you are changing the drive letter of the recovery partition, you may not be able to use it to recover your PC. Additionally, if you are using a Mac, you can also change your base station's name and password in AirPort Utility.

Frequently asked questions