Jazmin Li
If you want to find out who is on your Airport network, you can use the AirPort Utility app on your Mac. This will allow you to see how many devices are connected to your wireless network at any given time, but it won't tell you who is using your network without some detective work. You can also use the app to change your wireless password and restrict access to your network.
| Characteristics | Values |
|---|---|
| Wireless devices connected to the network | Can be viewed in the AirPort Utility app |
| Wired devices connected to the network | Cannot be viewed in the AirPort Utility app |
| Troubleshooting a Wi-Fi network | Can be done by checking if a particular device is "visible" from your Wi-Fi router |
| Base station connection status | A flashing amber dot indicates that the base station cannot establish a connection to the network or the internet |
| Base station startup status | A flashing amber and green dot indicates a problem with starting up |
| Base station information | Can be viewed by holding the mouse over the base station |
| Base station status messages | Can be viewed by clicking on the base station |
| Base station settings | Can be modified by selecting the base station and entering its password |
| Wi-Fi network access control | Can be enabled by selecting the base station, clicking "Edit", clicking "Network", and then clicking "Enable Access Control" |
| Wi-Fi channel | Can be manually switched by checking the channel on which the AirPort is operating in the AirPort Utility Summary screen |
| Wireless clients | Can be viewed one-by-one by pressing and holding the Option key and then double-clicking the Edit button |
Explore related products
What You'll Learn
How to see the list of devices connected to your Airport network
To see the list of devices connected to your Airport network, you can use the Airport Utility. When you first open the Airport Utility, it shows a graphical overview of your Wi-Fi network, including any base stations and devices connected to it. The base station's name and status are also shown in the overview.
To see the list of wireless clients connected to your Airport Extreme base station, select your base station. A pop-up window will appear, and any connected clients will show up under "wireless clients". Move your mouse cursor over a client, and another pop-up window will appear with additional status information.
To view more details about each client, click on the disclosure triangle (the little grey triangle next to each device name) to expand the information. For each client, you can see the connection quality, data rate, IPv4 address, hardware (MAC) address, RSSI, and Wi-Fi mode(s).
If you want to see the IP, Mac, and network name for WiFi devices, hold the option key and then double-click on the AirPort device providing DHCP services. A new 'Summary' tab will appear, and you can click on the outline icon in the wireless client list to see details.
Alternatively, you can use third-party applications such as Fing (available for Android and iOS devices) or iNet to scan your network and display a list of connected devices along with their hostnames and IP addresses.
Guide to Sleeping Comfortably in the Vegas Airport
You may want to see also
Explore related products
![Dualcomm10/100/1000Base-T Gigabit Ethernet Network TAP [ETAP-2003]](https://m.media-amazon.com/images/I/71PCWZwmvyL._AC_UL320_.jpg)
How to change your Airport network password
To change your Airport network password, you must first open the AirPort Utility app on your Mac. You can find this in the Utilities folder in the Applications folder. Once you have opened the app, you will see a graphical overview. Here, you should select the base station you want to configure and click 'Edit'. Depending on your setup, you may need to enter a password for the base station.
After this, click 'Wireless'. Now, you can change your password. Simply enter a new password in the Wireless Password field, and again in the Verify Password field. If you want your Mac to remember the new password, select 'Remember this password in my keychain'.
Finally, click 'Update' to save your changes. It is important to note that if you do not click 'Update' within five minutes of resetting the base station, it will default back to the previous password.
Before changing your password, you may want to find out how many devices are connected to your wireless network. To do this, open Finder > Applications > Utilities > AirPort Utility, and hold down the option key on your Mac while you double-click on the AirPort Express icon in the centre of the AirPort Utility window. This will show you how many devices are connected to your wireless network.
San Francisco Airport: Home to a McDonald's?
You may want to see also
Explore related products
How to set up a guest network
Setting up a guest network is a smart move for keeping your home internet more secure. It lets visitors connect to your Wi-Fi router and use your internet without accessing your personal devices.
There are two ways to go about setting up your guest Wi-Fi network, and the available method depends on your internet service provider and your router. Most new routers, including those provided by ISPs like AT&T, CenturyLink, Verizon Fios, and Xfinity, feature an app that lets you access and manage your Wi-Fi network. Each provider or router app will look a little different, but the option to create a guest Wi-Fi network should be relatively easy to find.
Once you've reached the guest Wi-Fi settings, enter your desired network name and password, then apply the changes. Your guests can connect to the new network the same way they would to any other Wi-Fi network: by selecting it from their device's list of available nearby networks and entering the password. You can also print a QR code to make it easier for guests to connect to your network.
If your router doesn't have an app, you can still set up a guest network by following these steps:
- Enter your router's IP address into your preferred browser. You can usually find this information on your device's Wi-Fi settings.
- Log in to your router by entering your router credentials. This information can often be found on your router, possibly on the bottom.
- Once you're logged in, look for guest Wi-Fi settings. If you can't find it right away, check under Wireless Settings or Network Settings.
- Enable the guest Wi-Fi network and create your desired network name and password.
- Save your new settings, and your guest network should now be ready for use.
By setting up a guest network, you can ensure that your personal devices and information remain secure while still providing internet access to your guests.
Vail's Airport Accessibility: Fly-In, Ski-Out Convenience
You may want to see also
Explore related products
How to set up a base station
Setting up a base station can be done in several ways, depending on the hardware and software you are using. Here is a step-by-step guide on how to set up a base station for a Mac using AirPort Utility:
Step 1: Connect the Modem
Connect the modem provided by your Internet Service Provider (ISP) to your AirPort Extreme using an Ethernet cable. Use the cable to connect to the bottom-most port on the back of the AirPort Base Station. Don't worry if you make a mistake; you will be prompted to fix things during the setup.
Step 2: Launch AirPort Utility
On your Mac, launch the AirPort Utility app, which can be found in the Utilities folder within the Applications folder.
Step 3: Configure the Base Station
Click on "Other WiFi Devices" in the upper right corner and then click "Other Options" to set up the AirPort for additional capabilities. Click "Next".
Step 4: Enter Network Information
Enter a Network Name and a Base Station Name. You can leave these as the default or change them as preferred. Enter a password for your network. It is recommended to have separate passwords for added security. If you have a Base Station with an internal hard drive, such as a Time Capsule, you can also choose a separate password for it.
Step 5: Enable Guest Network (Optional)
If you want to enable a guest network, click on the "Wireless" tab, then check "Enable Guest Network". Enter a new network name that is easily discernible from your regular "secured" network. Select your desired level of Guest Network Security: choose "None" for an open network or "WPA2" for a secure network. If you select WPA2 Personal, enter and verify your Guest Network Password.
Step 6: Restart and Connect Devices
Restart your Base Station. You can now start connecting your Wi-Fi-capable devices to your new access point. Depending on your coverage requirements, you may need to extend your network by installing additional access points in bridged mode.
Note: After completing the setup process, you have additional options for configuring your network, such as keeping your base station up to date and connecting storage devices for file sharing.
Exploring Train Accessibility at LaGuardia Airport
You may want to see also
Explore related products
How to control access to your Airport network
To control access to your Airport network, you can use the AirPort Utility app on your Mac. Here's a step-by-step guide:
- Open the AirPort Utility app, located in the Utilities folder within the Applications folder.
- In the graphical overview, select the base station you want to configure. This will display information about the base station, including its name and status.
- Click "Edit" to modify the base station's settings. You may need to enter a password for the base station.
- Click on the "Network" tab and select "Enable Access Control."
- Click on the "Timed Access Control" button to set specific days and times for network access.
- Modify the default behaviour for users joining the network. You can select "Unlimited (default)" to allow all devices access or customise access for specific devices.
- Use the pop-up menus in the "Wireless Access Times" area to choose specific days and time durations. You can add additional access times by clicking the "Add" button.
- If you want to provide unique access times for a specific device, click the "Add" button under the "Wireless Clients" list.
- Enter a name for the device and its MAC address. You can find tutorials online to locate a device's MAC address.
- Once you've added all your devices and customised their schedules, click "Save" to apply your changes.
- Finally, click "Update" for the changes to take effect.
By following these steps, you can control which devices can access your Airport network and specify the days and times for their access. This allows you to manage your network access according to your preferences and ensure that only authorised devices are connected.
Cancun Airport: Is There an Admirals Club Lounge?
You may want to see also
Frequently asked questions
You can use the AirPort Utility app to see a list of wireless devices connected to your network. If you want to see wired devices, you can use the shell command arp -a to scan your network.
The AirPort Utility app can be found in the Utilities folder in the Applications folder on your Mac.
If you hold down the Option key and double-click the AirPort Express icon, a summary window will appear, showing all connected devices. Wireless devices will be listed under the "Wireless Clients" section.
Yes, by holding down the Option key and double-clicking the AirPort Express icon, you can access a summary window that displays the names of connected devices.
Yes, you can use the AirPort Utility Setup Assistant to configure access settings for your network. You can set the days and times when users can access the network and enable Timed Access Control to modify default behaviours for new users.
