Lois Larson
The AirPort Utility is a wireless device that can be used to view a list of connected wireless clients and their signal strengths. However, it does not show wired clients by default. To view wired clients, you can try using a third-party application such as Fing, IP Scanner, or Peakhour, which can display both wired and wireless devices connected to your network. Alternatively, you can use the older Airport Utility 5.6, which includes wired and wireless devices under Logs and Statistics.
Explore related products
What You'll Learn
- The Airport Utility is for wireless devices
- The Network Utility shows all devices under display routing table information
- The Airport Utility 6.3.1 shows a list of WiFi devices connected to TimeCapsule
- The Airport Utility 6 shows a list of connected wireless devices
- The Airport Utility 5.6 shows an overview of addresses given out using DHCP
The Airport Utility is for wireless devices
The Airport Utility is a built-in application native to the OSX system that displays all information requested by the user. It is used to manage Wi-Fi networks and AirPort base stations, including AirPort Express, AirPort Extreme, and AirPort Time Capsule. The Airport Utility can be used to:
- Get a graphical overview of your Wi-Fi network and devices.
- Change base station and network settings.
- Manage advanced features such as security modes, wireless channels, IPv6 configuration, and more.
- Restart or restore a base station, or update the firmware on a base station when available.
- View or update passwords for your network, base stations, or disks.
- Access network information such as IP address, DNS servers, and router address.
- Manage DHCP reservations and port mappings.
- Configure base stations for IPv6.
- View status or error messages.
- Archive Time Machine backups.
London's Air Travel: Airports and Their Significance
You may want to see also
Explore related products
The Network Utility shows all devices under display routing table information
The Network Utility is a built-in application native to the OSX system that displays all devices under the display routing table information. The routing table is at the heart of making routing decisions. It stores information about directly connected routes and remote routes. Directly connected routes are those that come from the active router interfaces, while remote routes are remote networks connected to other routers.
To access the Network Utility, use the Spotlight search (the magnifying glass icon in the top right corner of the display) and select Network Utility from the options. From there, choose the Netstat tab and select the radio button "Display routing table information". Finally, hit the blue Netstat button. It may take a while for the results to appear. The results table will not display MAC addresses.
The summary screen will display a scrolling list of wireless clients. Clicking the disclosure triangle will expand the information for each client, including the connection quality, data rate in Mb/s, IPv4 address, hardware (MAC) address, RSSI in dBm, and the Wi-Fi mode the receiving device is operating in. The channel on which your AirPort is operating for both 2.4GHz and 5GHz will also be displayed.
It is worth noting that the Airport Utility only shows wireless clients and not wired or ethernet clients. To view wired clients, you can use a shell command that scans your network on all connected interfaces or install a third-party application such as Fing, which is available for both Android and iOS devices.
Navigating Airports: Understanding Disability Access and Services
You may want to see also
Explore related products
The Airport Utility 6.3.1 shows a list of WiFi devices connected to TimeCapsule
The Airport Utility 6.3.1 shows a list of WiFi devices connected to Time Capsule. However, it only shows up as a pop-over window, and many devices show no name or device type. This can be a concern for users, who may worry about an unknown intruder on their network.
To see a summary of all connected devices and some statistics, open the Airport Utility and press the option key when opening the Airport Extreme. This will bring up a summary window. Alternatively, try Alt + Double-clicking in the AirPort "Device icon" in AirPort Utility.
Another way to see all devices, including ethernet-connected ones, is to use the Network Utility, which is a built-in application native to the OSX system. This can be found by using the Spotlight search (the magnifying glass icon in the top right corner of the display) and then selecting the Netstat tab, choosing the radio button "Display routing table information", and then hitting the blue Netstat button. However, the data can be difficult to interpret.
There are also third-party applications that can be used to scan your network for all connected devices, such as Fing, which is available for both Android and iOS devices, and iNet, which has a dedicated mode for AirPort routers.
Burbank Airport Starbucks: Where to Find Your Coffee Fix
You may want to see also
Explore related products
The Airport Utility 6 shows a list of connected wireless devices
To see the list of wireless devices on Airport Utility 6, open the Airport Utility and press the Option key when opening Airport Extreme. This will bring up a summary window with a list of all connected devices and some statistics. You can also see this list by holding the Option key and double-clicking the Airport Extreme icon, which will bring up the Summary tab. Here, you can see the list of wireless clients and more information about them, such as connection quality, data rate, IPv4 address, and Wi-Fi mode.
The macOS Airport Utility can be found in the Applications > Utilities folder. You can get a quick overview of an Airport router's settings and clients by clicking on the image of the Airport on the utility's main screen. More information can be viewed by hovering your cursor over a wireless client in the list.
Exploring Beyond the Airport During a Layover
You may want to see also
Explore related products
![OMNIHIL [UL Listed] White 8 Foot Long AC Power Cord Compatible with Apple Airport Extreme 6th Generation](https://m.media-amazon.com/images/I/81rteevX69L._AC_UL320_.jpg)
The Airport Utility 5.6 shows an overview of addresses given out using DHCP
The Dynamic Host Configuration Protocol (DHCP) is a network management protocol used on Internet Protocol (IP) networks. DHCP automatically assigns IP addresses and other communication parameters to devices connected to the network. DHCP is a client-server protocol where the DHCP server manages a pool of unique IP addresses and information about client configuration parameters. When a device connects to a network, the DHCP-enabled client sends a request to the DHCP server, which then assigns an IP address from the pool of addresses. This eliminates the need for manually configuring network devices individually.
The Airport Utility 5.6 provides an overview of addresses given out using DHCP by displaying a list of wireless clients connected to the network. This list can be accessed by opening the Airport Utility and pressing the Option key when opening the Airport Extreme. A summary window will appear, showing all connected devices and some statistics. The summary screen will also display the IPv4 address of each device, the hardware (MAC) address, and the Wi-Fi mode the device is operating in.
It is important to note that some versions of Airport Utility, such as 6.3 and 6.3.1, only show a list of wireless clients and do not include wired or ethernet clients. To see all devices connected to the network, including ethernet connections, users can try installing a third-party application like Fing, which is available for Android and iOS devices.
Additionally, the Network Utility on OSX systems can provide detailed network information, including a list of all devices under display routing table information. However, this data may be challenging to interpret for some users.
Greek Airport Cities: Exploring Greece's Aviation Network
You may want to see also
Frequently asked questions
The Airport Utility only shows wireless clients. To see wired clients, try an app like Fing, available for free on iOS and Android devices.
Yes, try IP Scanner or IP Scanner Pro for iOS or OSX.
Place your cursor over the Airport Extreme icon to see a list of names. To see more information, hold the Option key and double-click the icon to open the Summary tab.
In Airport Utility 5.6, go to Logs and Statistics to find an overview of the addresses given out using DHCP.
In Airport Utility 6, click on the base station image to get a pop-up with a list of connected wireless devices.
