Extending Wifi Range With An Airport: A Comprehensive Guide

You can extend your Wi-Fi network with an additional base station using AirPort Utility on your Mac or AirPort Utility for iPhone, iPad, or iPod touch. The setup assistant will automatically choose settings for extending your network, but you can also set up your network using different settings. After extending your Wi-Fi network, your network uses the existing network settings and broadcasts to a larger area.

Buy an Apple AirPort Express

If you want to extend your Wi-Fi network, you can buy an Apple AirPort Express. This will allow you to extend your existing Wi-Fi network with an additional base station. You can set up your AirPort Express using AirPort Utility on your Mac or AirPort Utility for iPhone, iPad, or iPod touch.

To set up your AirPort Express, first, make sure the power cord is connected to the Power port on the primary base station and plugged into a wall outlet. Then, plug one end of an Ethernet cable into the WAN port on the base station you’re adding to the network and the other end into a LAN port on the primary base station.

By default, the AirPort Utility will set up your AirPort Express to extend your current network. The light on your AirPort Express should be green when the setup is complete.

You can also extend your Wi-Fi network by going to Settings > Wi-Fi on your device and then tapping the name of your base station. Follow the onscreen instructions and the setup assistant will automatically choose settings for extending your network.

Plug in the AirPort Express between your current AirPort base station and where you want your Wi-Fi signal to be stronger

To extend your Wi-Fi network with an AirPort Express, you need to plug in the AirPort Express between your current AirPort base station and where you want your Wi-Fi signal to be stronger.

First, make sure that the power cord is connected to the Power port on the primary base station and plugged into a wall outlet. Then, take an Ethernet cable and plug one end into the WAN port on the base station you're adding to the network. Plug the other end into a LAN port on the primary base station.

Now, place the AirPort Express in range of your primary base station and near the area where you want your wireless connection to be stronger.

Once you've done this, your AirPort Utility should automatically set up your AirPort Express to extend your current network. You can verify this by checking that the light on your AirPort Express is green.

Go to Settings > Wi-Fi, then tap the name of your base station

To extend your WiFi with an AirPort, you'll need to use AirPort Utility on your Mac or AirPort Utility for iPhone, iPad, or iPod touch. First, make sure the power cord is connected to the Power port on the primary base station and plugged into a wall outlet. Then, plug one end of an Ethernet cable into the WAN port on the base station you're adding to the network, and the other end into a LAN port on the primary base station.

On your device, go to Settings > Wi-Fi, then tap the name of your base station (for example, “AirPort Extreme 0affff”) listed under “Set up a new AirPort base station.” Follow the onscreen instructions. The setup assistant will automatically choose settings for extending your network. If you want to set up your network using different settings, tap Other Options.

Detailed information about wireless networking, including a variety of support articles and a PDF of the setup guide that came with your base station, is available on the AirPort Support website.

Follow the on-screen instructions

To extend your Wi-Fi network with an AirPort Express, you'll need to follow the on-screen instructions. First, make sure that the power cord is connected to the Power port on the primary base station and plugged into a wall outlet. Then, plug one end of an Ethernet cable into the WAN port on the base station you're adding to the network, and the other end into a LAN port on the primary base station.

On your device, go to Settings > Wi-Fi, then tap the name of your base station (for example, “AirPort Extreme 0affff”) listed under “Set up a new AirPort base station”. Follow the on-screen instructions. The setup assistant will automatically choose settings for extending your network. If you want to set up your network using different settings, tap Other Options.

Detailed information about wireless networking, including a variety of support articles and a PDF of the setup guide that came with your base station, is available on the AirPort Support website. By default, the AirPort Utility will set up your AirPort Express to extend your current network.

After extending your Wi-Fi network, your network will use the existing network settings and broadcast to a larger area. Just place the AirPort Express in range of your primary base station and near the area where you want your wireless connection.

If you want to set up your network using different settings, tap Other Options

You can extend your existing Wi-Fi network with an additional base station using AirPort Utility on your Mac or AirPort Utility for iPhone, iPad, or iPod touch. After extending your Wi-Fi network, your network uses the existing network settings and broadcasts to a larger area.

To set up your network, go to Settings > Wi-Fi, then tap the name of your base station listed under “Set up a new AirPort base station”. Follow the on-screen instructions. The setup assistant will automatically choose settings for extending your network. If you want to set up your network using different settings, tap 'Other Options'.

Detailed information about wireless networking, including a variety of support articles and a PDF of the setup guide that came with your base station, is available on the AirPort Support website.

To extend your Wi-Fi network, place your AirPort Express in range of your primary base station and near the area where you want your wireless connection. Verify that the power cord is connected to the Power port on the primary base station and plugged into a wall outlet. Plug one end of an Ethernet cable into the WAN port on the base station you’re adding to the network, and the other end into a LAN port on the primary base station.

Frequently asked questions