Exploring Compatibility: Ex2700 And Airport Extreme

The Netgear EX2700 is a WiFi range extender that can be used with an Apple AirPort Extreme router. However, some users have reported issues with the setup process, such as the extender not being recognized by the AirPort Extreme or frequent drops in the connection. To resolve these issues, it is recommended to connect the devices via an Ethernet cable, reset the extender, or update the firmware. While some users have found workarounds, others have returned the product or opted for an Apple AirPort Express or another AirPort Extreme to extend their wireless network.

EX2700 setup with an AirPort Extreme

The EX2700 can be used as a WiFi range extender for the Apple AirPort Extreme router. To set up the EX2700 with an AirPort Extreme, you can follow these steps:

• Connect to the EX2700 default wireless network: On your computer or mobile device, connect to the EX2700's default wireless network (SSID) which is typically "NETGEAR_EXT". The passphrase for this network can be found on the product label.
• Access the EX2700 configuration page: Open a web browser and navigate to http://192.168.1.250/ to access the EX2700's configuration page. Here, you can configure the extender's settings.
• Connect the EX2700 to your AirPort Extreme network: Once you have accessed the EX2700's configuration page, follow the on-screen instructions to connect the extender to your AirPort Extreme network. This may involve entering the WiFi password for your AirPort Extreme network.
• Position the EX2700 in a suitable location: Place the EX2700 in a location where the signal from your AirPort Extreme router is still strong, such as at the beginning of a long hallway. This will ensure that the EX2700 can extend the WiFi coverage effectively.

It is important to note that some users have reported issues with the EX2700 frequently dropping connections. To troubleshoot this issue, ensure that both the EX2700 and the AirPort Extreme router are running the latest firmware updates. Resetting the EX2700 or updating its firmware may also improve its stability.

EX2700 extender drops frequently

The EX2700 extender can be used with an Apple AirPort Extreme router. However, some users have reported frequent drops in connection. This issue can be caused by several factors, including:

• Incorrect placement of the extender: It is important to place the extender in an open area, away from concrete walls, metal doors, mirrors, glasses, and electrical appliances such as microwaves and refrigerators, which can interfere with the WiFi signal.
• Outdated extender firmware: Updating the extender's firmware to the latest version can help improve stability and performance.
• Incorrect WiFi network connection: After installing the extender, it creates a new extended WiFi network with a different SSID. Ensure that your devices are connected to the correct WiFi network.
• Incomplete Netgear extender setup: A partial or incomplete setup can cause connection issues. Ensure that the extender is properly set up and configured.

To troubleshoot the frequent drops, users can try the following:

• Power cycle the extender: Disconnect the extender from the power source, wait for a few minutes, and then reconnect it.
• Reposition the extender: Move the extender closer to the main router and ensure it is placed in an optimal location, free from interference.
• Update the extender's firmware: Check for the latest firmware version and update the extender to improve performance and stability.
• Reset the extender: Performing a factory reset on the extender can help resolve connection issues.

If the issue persists, it is recommended to contact Netgear support or technical professionals for further assistance.

Compatibility of Netgear WN3000RP with Airport Extreme

The Netgear WN3000RP wifi range extender can be used with the Airport Extreme, but it may require a few additional steps during the setup process.

Firstly, it is recommended to set up the Airport Extreme network as a normal network, following the Apple guide. Then, check the connection with your devices (iMac, iPad, iPhone, PC, etc). Next, perform a factory reset on the Netgear extender and power it on. Using a PC or Apple iMac (or similar), find the device using wifi setup and connect to it. You should then be able to log on to the device setup page via the internet.

After configuring the Netcomm device, connect it to the Apple network. You will then need to find the extender on your devices - it will have the same name as the original network, with the suffix 'EXT'. You will need to join this new network.

Some users have reported that, while this setup works, it is not possible to walk your laptop from the area near the "main" router to the "extender" and stay on the same network. You have to manually switch your laptop from one network to another with the "EXT" added as you move from one area to another.

One user has suggested renaming the SSID on the extender to the same one as your main WiFi SSID, which should resolve this issue.

Another user has suggested that, if you are using Mac Address isolation (timed access in airport language), you should add the virtual MAC address of each device you wish to pass through the range extender to your list of allowed devices on your airport router.

Overall, while the Netgear WN3000RP can be used with the Airport Extreme, it may require some additional steps during setup and may not provide a seamless connection when moving between the main router and the extender.

EX2700 connection issues

The EX2700 is a WiFi range extender that can be used with an Apple AirPort Extreme router. However, some users have reported issues with the EX2700, including frequent drops in connection and difficulty setting it up.

One common issue with the EX2700 is that it frequently drops its connection to the internet, requiring a reset. This can happen multiple times a day and can be frustrating for users. In some cases, the signal may come back on its own, but often, users need to reset the extender or go into network diagnostics to re-establish the connection.

Another issue that has been reported is difficulty setting up the EX2700 with the AirPort Extreme. The AirPort Extreme may not recognize the EX2700, and users may encounter errors when trying to connect to it via mywifiext.net or mywifiext.local. In this case, it is suggested to try connecting via an ethernet cable or resetting the EX2700 to its default settings.

Additionally, some users have reported that their wired devices connected to the EX2700 range extender stopped working after a factory reset. In some cases, this may be due to the device not getting a new IP address from the new network. Rebooting the device can help resolve this issue.

It is also important to ensure that the EX2700 and the router are updated to the latest firmware, as this can improve stability and fix bugs that may be causing connection issues.

EX3700 extender setup with an AirPort Extreme

The EX3700 extender can be set up with an Apple Airport Extreme router, but there are some challenges. The Apple AirPort Extreme router assigns channels for both frequencies automatically, which may not be suitable for the EX3700. This can cause a "NO CONNECTION" error when trying to sync the EX3700 with the online Genie.

To resolve this, use the Airport utility to assign a new channel for each frequency. For example, 11 and 153 for 2.4 and 5 GHz respectively. Then, re-run the NetGear setup wizard.

Additionally, the EX3700 does not manage traffic across both frequencies as the Apple router does. You will need to manually assign which frequency will be used with each of your WiFi devices, resulting in three wireless networks to choose from: your original AirPort network and two extension networks, one for each frequency band (2.4 and 5 GHz).

For setup, you can also use the smart installation setup process from Netgear, which has a video walkthrough on their support site. Alternatively, you can hardwire the EX3700 via an ethernet cable to your router to set it up.

Frequently asked questions